Page 2 of 2

Re: Rawflash v4

Posted: Tue Dec 13, 2011 12:23 am
by barnhilltrckn
[quote="tuxuser"]
runs from every XeLL, no idea why xbox-scene is spreading such false info...
[/quote]

No idea either. Now i had problems with ver. 2 but since 3 came out ive had zero problems even with bb nands. Sounds to me like user error on there part. :-\

Re: Rawflash v4

Posted: Tue Dec 13, 2011 8:42 am
by cjackson
[quote="tuxuser"]
runs from every XeLL, no idea why xbox-scene is spreading such false info...
[/quote]probably b/c in readme it says stage2 xell

anyway if run on all xell after i apply RGH to myconsole can i use this to write  NAND to my console without error or should i solder my SPi flasher again to write.
since i ve two xboxes i didn't keep flasher on MB but i could solder pins for just easy plugin.  If rawflash do my job, i won't need to open box again and solder

Re: Rawflash v4

Posted: Tue Dec 13, 2011 10:04 pm
by barnhilltrckn
[quote="cjackson"]
[quote="tuxuser"]
runs from every XeLL, no idea why xbox-scene is spreading such false info...
[/quote]probably b/c in readme it says stage2 xell

anyway if run on all xell after i apply RGH to myconsole can i use this to write  NAND to my console without error or should i solder my SPi flasher again to write.
since i ve two xboxes i didn't keep flasher on MB but i could solder pins for just easy plugin.  If rawflash do my job, i won't need to open box again and solder
[/quote]

Yes it should work just fine but im sure there are some unseen errors that could occur although doubtful.

Re: Rawflash v4

Posted: Tue Dec 13, 2011 10:07 pm
by cjackson
at least i try and give feedback

Re: Rawflash v4

Posted: Mon Dec 19, 2011 2:15 am
by g33k
thx for this nice and usefull tool  8)

but why are ECC-errors treated like bad blocks? is there any reason i cant see?

Re: Rawflash v4

Posted: Sat Dec 24, 2011 9:18 am
by lprot
Thanks cOz. Properly works on Jasper 512Mbyte with Samsung K9F4G08U0B NAND.

Re: Rawflash v4

Posted: Tue Dec 27, 2011 10:20 am
by doolcan
How long is this supposed to take.  I have been stuck on the same black screen for 15 minutes.  I really don't want to turn it off and have a brick.  16mb jasper 

Re: Rawflash v4

Posted: Tue Dec 27, 2011 10:24 am
by sk1080
I can guess those last 4 lines are "Initializing Wireless Controller..."
That indicates it didn't get as far as actually flashing, so you can probably turn it off
lemme guess, no nand cable?

EDIT: crappy internet connection decided to download the image, yea, turn it off

Re: Rawflash v4

Posted: Tue Dec 27, 2011 10:27 am
by doolcan
nah I have a nandx but every time i even look at this jasper wrong i have to reflow my stby clock joint.  hate opening it

Re: Rawflash v4

Posted: Tue Dec 27, 2011 10:30 am
by sk1080
it looks like it didn't recognize your flash drive once rawflash opened
you might want to try again

Re: Rawflash v4

Posted: Tue Dec 27, 2011 10:42 am
by doolcan
Thanks for the help.  I reformatted the thumbstick and used the rear usb port this time.  Worked like a charm.

Re: Rawflash v4

Posted: Tue Dec 27, 2011 8:04 pm
by barnhilltrckn
[quote="doolcan"]
Thanks for the help.  I reformatted the thumbstick and used the rear usb port this time.  Worked like a charm.
[/quote]

See thats what i men right there. Alot of people claim they have problems with this program but it can ussually be solved by doing things you did. Change usb stick, format it, different usb port, ect, ect. This really is a great program to use and its so much easier to use if you dont have a setup to flash your nand without opening your 360.

I for one have had ZERO problems since v3 was released and ive used it on 16mb phats, BB phats, and slims many times. If only people would try things like you did other than trying it once without trying different methods and just assuming that its a problem with the program.

Re: Rawflash v4

Posted: Fri Mar 23, 2012 8:55 am
by bakterio
Hi

After flashing the last 360 multibuilder (.93) generated nand, i got this error code when initializing nand en xell:

!SFCX: Unknown error at address 00FC200: 00000220

And when trying to flah with rawfalsh v4 i got bad block errors from address 0x0384 and above

Is it recommended to use another rawflash version that not check this bad blocks and flash anyway?

Thanks and regards

Re: Rawflash v4

Posted: Sat Nov 21, 2015 2:56 pm
by ammar123
when i start xell at the end it says found:xeneon.elf file found......and after that the screen becomes blank and nothing happens but the xbox is still on...please help
tell me what to do to run raw flash v4...please :( :( :(