xell problem in the corona v2

Ask/Talk about XeLL in here
Post Reply
marcelo

xell problem in the corona v2

Post by marcelo » Wed Dec 26, 2012 11:43 pm

Good night got an error on my xbox 360 on my MONITOR WITH the error so
I've tried the alternative ECC failed .......


XeLL - First stage
* Attempting to wakeup all CPUs...
CPUs online: 01..
CPUs online: 3f..
* success.
* Decompressing stage 2...
* Loading ELF file...
0x00000000 0x00060ac0, Loading .text...done
0x00060ac0 0x00000814, Loading .elfldr...done
0x000612d8 0x00005cac, Loading .data...done
0x00066f84 0x00000290, Loading .got2...done
0x00067218 0x00000060, Loading .sdata...done
0x00067278 0x00009c58, Loading .rodata...done
0x00070ed0 0x000000e4, Loading .eh_frame_hdr...done
0x00070fb4 0x00000584, Loading .eh_frame...done
0x00071600 0x00699578, Clearing .bss...done
0x0070ab78 0x000000b4, Clearing .sbss...done
* GO (entrypoint: 0000000000008900)
Xenos GPU ID=5841
! SFCX: Unsupported Type A-0
! config: sfcx not initialized
unknown SMC bulk msg
DVD cover state: 62
AVPACK detected: 5c
xenon_smc_i2c_ddc_lock failed, err=1
xenon_smc_i2c_write failed, addr=01ec, err=1
xenon_smc_i2c_ddc_lock failed, err=1
. ana disable
. ana enable
Last edited by marcelo on Thu Dec 27, 2012 3:11 pm, edited 1 time in total.

taik03

Re: xell problem in the corona v2

Post by taik03 » Fri Dec 28, 2012 3:11 am

i have similar problem as well. been looking for a solution but seems like nobody knows corona v2 4gb

marcelo

Re: xell problem in the corona v2

Post by marcelo » Fri Dec 28, 2012 3:20 pm

managed to solve in my case here had 3 cables connecting the ..... 1 cable network, 2cabo hdmi, 3 monitor called the 3 cables ai could climb the xell

barnhilltrckn

Re: xell problem in the corona v2

Post by barnhilltrckn » Fri Dec 28, 2012 4:00 pm

The corona boards are still a work in progress in terms of xell. The guys here are working on it and until then we are just going to have to wait. Thats why I have a trinity. I have a slim but still have xell :p

xb0xguru

Re: xell problem in the corona v2

Post by xb0xguru » Sat Dec 29, 2012 1:37 pm

[quote="marcelo"]
Good night got an error on my xbox 360 on my MONITOR WITH the error so
I've tried the alternative ECC failed .......


XeLL - First stage
* Attempting to wakeup all CPUs...
CPUs online: 01..
CPUs online: 3f..
* success.
* Decompressing stage 2...
* Loading ELF file...
0x00000000 0x00060ac0, Loading .text...done
0x00060ac0 0x00000814, Loading .elfldr...done
0x000612d8 0x00005cac, Loading .data...done
0x00066f84 0x00000290, Loading .got2...done
0x00067218 0x00000060, Loading .sdata...done
0x00067278 0x00009c58, Loading .rodata...done
0x00070ed0 0x000000e4, Loading .eh_frame_hdr...done
0x00070fb4 0x00000584, Loading .eh_frame...done
0x00071600 0x00699578, Clearing .bss...done
0x0070ab78 0x000000b4, Clearing .sbss...done
* GO (entrypoint: 0000000000008900)
Xenos GPU ID=5841
! SFCX: Unsupported Type A-0
! config: sfcx not initialized
unknown SMC bulk msg
DVD cover state: 62
AVPACK detected: 5c
xenon_smc_i2c_ddc_lock failed, err=1
xenon_smc_i2c_write failed, addr=01ec, err=1
xenon_smc_i2c_ddc_lock failed, err=1
. ana disable
. ana enable
[/quote]

Is this where the log stops, or do you get '..............................' continuously after this? If so, you need the tuxuser release of xell.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests